Easily Pair With Openload and Others
Pairing with Openload is very easy and takes no time at all. Below are the step by step instructions to get the excellent Openload source working in One Alliance.
When you have chosen an Openload link in any addon you will get the following message.
Thankfully, when you’re looking for a Movie to watch, you don’t have to leave One Alliance when pairing with Openload to get a link working.
By using a Mobile (Cellular) Phone you can quickly pair your device. As long as your Phone and the Device you are using One Alliance on are connected to the same Internet connection then this process will take no time at all.
*note – please be aware that pairing from the Openload site may mean you get pop ups. Use an adblock application to stop them*
1. Once you get the message asking you to pair with Openload, go to the browser on your Phone and type in either of the addresses below.
2. Once you’re on the site, the first thing you need to do is tick the ‘I am not a robot’ box.
3. Next scroll down past the two advertisements and click on the Pair button at the bottom of the page.
4. You should now be paired with Openload for up to 4 hours and the content you clicked on will auto play once pairing is confirmed.
This method can also be used the same way for other sources that require pairing such as VideoMe, Vidto & Streamin.
*Note to those of you using VPN. Unless your phone is connected to the same vpn address as your box then you will need to pair using your broswer from your box. To save time pair with Openload first before you start up One Alliance. Also if you have a poor remote consider using a mouse or air remote.*
Info courtesy noobsandnerds.com